Return to the Tool Shed Forum | Post a Follow-Up

McCulloch Chain Saw

Posted by redrabbit Pgh Pa (My Page) on
Fri, Jul 26, 13 at 22:40

McCulloch Model CS 38 EM , ser# 110501. My problem was gas lines which I replaced now I need to know which line the filter goes on and what to do with the other. Also can I start and run this without the chain bar being on the saw ???? Thanks in advance

Follow-Up Postings:

RE: McCulloch Chain Saw

1. The youtub at this address below might help.

2. I found and shared most two cycle's carbs fuel lines info in a post. I’m not able to find that post. If you remember it, please post it again.

3. Taking good digital Pics before and while disassembling is a plus. Except! Some jobs look so simple,” I’ll say I won’t need that”. WRONG!

RE: McCulloch Chain Saw

The link starts referring to Ryobi but relates to McCulloch also.

Here is a link that might be useful: This Youtube might help you.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here