Return to the Tool Shed Forum | Post a Follow-Up

 o
wood chipper blades

Posted by kdooz wi (My Page) on
Fri, Aug 2, 13 at 0:31

Does anyone know if there are any improved blades for wood chippers? I have an MTD Yard Machines 10hp chipper/shredder. I have a lot of white spruce branches that I am chipping. They are pretty tough and stringy. It seems to me that if the blades had some teeth on them they would work better. I have searched for blades and all I can come up with are the stock blades. Any help would be appreciated. Thanks


Follow-Up Postings:

 o
RE: wood chipper blades

Ive just taken mine out and sharpened them with my bench grinder. My chipper has gone through junipers, pine, oak, maple, etc.., and they just keep going with periodic sharpening. They sometimes produce strings instead of chips too.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here