|
Wed, Aug 10, 11 at 9:20
| Hello, Just purchased this item. It has about 10 minutes of use so far. Love it in every way so far. My only concern is that the engine runs super smooth from 0-50% throttle. From 50-90% there is a small vibration, from 90-100% there is a bit more. Is this normal? Why would the engine run smoother at lower RPM's. You can even see the head unit shaking a bit at higher RPM's (close to 100% throttle) I am not convinced there is anything wrong with it, I think it mat be the fact its a single cylinder engine. Any feedback would be appreciated. Thanks, Aristole Zoulas, Warwick, NY |
Follow-Up Postings:
|
| Vibrations within trimmers usually lend themselfs to loose or improperly aligned power heads or shaft / cable components . Ensure yours is installed correctly and all fasteners are tight , including the powerhead along with adequate lubrication of shaft . |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.