Return to the Tool Shed Forum | Post a Follow-Up

replace cable asembly on toro 20058

Posted by barry529 PA (My Page) on
Sun, Aug 7, 11 at 18:40

Hi folks,
I'm trying to replace the electric start housing on a 2006 toro model 20058 self propelled mower. I need to know how to remove the blade control cable near the top of the left handle, so I can slide the broken housing off and put the new one on. I tried prying it, but was afraid to break it. Any suggestions?? THANKS>

Follow-Up Postings:

RE: replace cable asembly on toro 20058

I think what you are referring to is the end of the outer cable that snaps into the housing? It should squeeze together and pull back through.

RE: replace cable asembly on toro 20058

Thanks, tomplum, I'll try that.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here