Return to the Tool Shed Forum | Post a Follow-Up

 o
pressure washer dilemma

Posted by jr53 none (My Page) on
Sat, Aug 10, 13 at 19:47

I have a Excell xr2600 pressure washer. Engine runs fine. Attach water, pressure hose and wand - turn on water -everything runs fine. Water comes out of pressure hose/wand ok. Add any size tip (smaller than a soap tip) to the wand and the pressure washer will run and spray full power for about 5 - 10 seconds then lug down as if gas starved and die. Re-starts and will run fine until the trigger is pulled - then 5 - 10 seconds and stop.This will happen forever. Spent many hours troubleshooting the unit including a full carb cleaning and unloader valve cleaning but haven't had any luck. Any ideas?


Follow-Up Postings:

 o
RE: pressure washer dilemma

Ah it sounds like you might have a problem with either the fuel filter or more than likely the engine speed throttle.

Read down to the last bullet point on the first section where it talks about gas engines on this link.

Let me know if this works or not.

Good luck

Here is a link that might be useful: Tips for pressure washer engines.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here