Return to the Tool Shed Forum | Post a Follow-Up

 o
IDC(Ryobi) string trimmer gas tank removal

Posted by mvron (My Page) on
Thu, Aug 11, 11 at 21:54

How does one remove the gas tank on this IDC 500 Supreme string trimmer. Any ideas would be much appreciated. This unit is now called Ryobi. Model is IDC 500-2.


Follow-Up Postings:

 o
RE: IDC(Ryobi) string trimmer gas tank removal

If it is like most i have seen, you have to remove the back plate that covers the part where the connecting rod goes around the crankshaft. A bunch of screws to remove, and it pulls off, and the fuel tank will practically fall off. Of course, there are other ways it is held on, but this is the most i have seen.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here