Return to the Tool Shed Forum | Post a Follow-Up

Small Scale Grain Harvester

Posted by zeroc (My Page) on
Sun, Sep 19, 10 at 17:31

I posted this over in the harvest section and was suggested to post it over here.

I've been having issues finding information on a small scale grain harvester. Either as a walk behind, riding, or three point tow behind unit. I want to do somewhere in the range of 10 acres so I don't exactly need a half million dollar combine. I've seen these types of units being used over in Asia but can't seem to find anything in the states. Anybody have any idea where and how much it'd cost to acquire something like this? It seems that the units over it china are somewhere in the range of 5,000 to 10,000 bucks, but it seems they're only over there so it'd have to be imported to get one unless someone in the US already deals in these and it's just difficult to find them.

I plan on living somewhere in New England (we haven't decided exactly where yet) which isn't exactly the grain capital of the world which is why I'm interested in small scale production. But being in New England will make it difficult to find anyone that I could pay to harvest such a small plot locally, someone would have to end up traveling a pretty good distance, so it probably would end up being cost prohibitive. And i want to grow a couple different grains that have different harvest times. Any ideas?


Follow-Up Postings:

RE: Small Scale Grain Harvester

You get market bulletin from georgia in fall there listing small combines some as low 2500 dollars. You need to be good repairing old machinery. www dot agr dot georgia dot gov make that into link it take to Farmers and Consumers market bulletin. Out side state subcribe 20 dollars year biweekly prints. link below from china wheat harvester walk behind two wheel tractor. BSC and Goudi two wheel tractor dealers are in us contact them be best help.

Here is a link that might be useful: wheat harvester

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here