Return to the Tool Shed Forum
| Post a Follow-Up
information for fuel pump
| | |
Posted by rtlbob B.C. (My Page) on Sat, Oct 24, 09 at 2:22
| I am looking for a vacuum fuel pump . Its for a kipor kge 1000ti genset. I am in B.C. Canada. The local shop has to get it out of eastern Canada. Part plus shipping $50 to $60 dollars. Anyone out there get it for me cheaper? Or an after market part. Bob |
Follow-Up Postings:
RE: information for fuel pump
| | |
- Posted by canguy British Columbia (My Page) on
Sat, Oct 24, 09 at 12:29
| Welcome to the world of Chinese knockoffs. |
RE: information for fuel pump
| | |
Can't you buy one of the vacuum type of fuel pump? An aftermarket pump will work well. To get the vacuum to operate the pump, i get a brass fuel line threaded nipple, drill a hole in the plastic oil fill tube, up near the top, then screw in the nipple, and attach the hose to it! I've seen several types, especially on B&S Vanguard engines.
The pump does not "suck" the oil up the dip-stick tube! But it does give you the vacuum to operate the pump. |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
|
|
|
