Return to the Tool Shed Forum | Post a Follow-Up

 o
What will a Toro Single/Double Stage Snowblowers convert into

Posted by loger (My Page) on
Sat, Oct 23, 10 at 10:58

What will a Toro Single/Double Stage Snowblowers convert into to be useful in North TX Dallas Area? A friend moved back from PA and moved his 20 + year old smallest blower back. I doubt he will ever need it here. Will it convert to a leaf blower or at least use the motor for etc.. Are most 2 or 4 cycle engines? loger


Follow-Up Postings:

 o
RE: What will a Toro Single/Double Stage Snowblowers convert into

A single cylinder 3-4-5 or more horse-power engine is always being sought by somebody. Depending on wether it is the vertical or horizontal crank-shaft, will be how he should sell it. My son has a log-splitter that uses a 4 hp engine. I took it off a lawn tool, and it works well. As for the snow-blower part, it might be used to blow sand out of the garage. A better use for it would be something to be converted to war usage, minus the engine!
My Grand-father had a very old Fordson farm tractor sitting behind the barn. One time i went to visit, and asked what happened to the old tractor.
He said that the Air Force had dropped it on Japan in WW II! Go figure!


 o
RE: What will a Toro Single/Double Stage Snowblowers convert into

Rusty, Thanks For The Reply/Ideas!

Can you post a link to the log splitter? I have one with a 1 HP electric motor that has worked well with all sizes of green oak wood up to 30”dia. It met it’s match on some dry wood last week. Plus, the pump is loud and I feel it gave me ringing ears before I started wearing muffs. The splitter was a gift and technology I was not use to. Links to my splitter are below under the title “log splitter's ram/cylinder's seal leaked” or at the link below. loger

http://forums2.gardenweb.com/forums/load/tools/msg102107072465.html?8


 o
RE: What will a Toro Single/Double Stage Snowblowers convert into

Naw, i'm not into posting links in these forums. If the electric motor gave out, then either buy a new motor, or buy a gasoline engine and adapt it to the splitter. Not a hard task. Just ask for ideas locally where you can lay yer hands on the items needed.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here