Return to the Tool Shed Forum | Post a Follow-Up

Troybilt super tomahawk bolt size

Posted by mtnfrmr none (My Page) on
Tue, Oct 25, 11 at 11:04

Can anyone help me with the correct bolt size that fits into the driveshaft of a TroyBilt Super Tomahawk #15014? This is the bolt that holds the driveshaft on the chipper side of the unit.

Thru a series of missteps, I have lost the original bolt.

Follow-Up Postings:

RE: Troybilt super tomahawk bolt size

  • Posted by ericwi Dane County WI (My Page) on
    Wed, Oct 26, 11 at 12:27

This is likely to be a high strength bolt, and it should be marked as such on the head. It might be best to get a replacement directly from the TroyBilt factory.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here