Return to the Tool Shed Forum
| Post a Follow-Up
Sears 944.524700 snowblower
| | |
Posted by garry123 (My Page) on Fri, Oct 30, 09 at 15:46
| I have to replace a broken auger bearing. what are the procedures for doing so? |
Follow-Up Postings:
RE: Sears 944.524700 snowblower
| | |
| Couldn't find that model on Sears look up. You are referring to a support bearing for the front auger shaft- correct? If it is a 1 piece housing, most times you have to remove the driven pulley etc and bring everything out the front. If you are real lucky, you may be able to remove both auger bearing retainers, any box supports and twist them in. In either case, look real hard at the impeller bearing for looseness. They tend to be a high wear item. |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tool Shed Forum
|
|
|
