I believe parts for the Baker are pretty much non existent. It was a good machine but the company disappeared years ago. If you are mechanically inclined you likely could adapt or fabricate parts.

I am looking for an operator manual for thi machine Having problem installing new drive belt

I have one, and the orig. manual. I can make you a copy of what ever you need , fortunately the manual is extremely detailed enough to go to the local hardware store and buy exact size pins and other needs to keep it in optimum working condition. I will take a few days to find it since I am busy now. Todd

I am looking for a belt for my baker 912PE-8.0 hp chipper/shredder i need to know the length and width of the belt any info on this would be greatly appriecieated thank you

I would kike to find a copy of the owners manual for the baker 912 8e as well. If anyone could point me in the right direction, I would greatly appreciate it.

I am also looking for instructions on a baker 912-p 8.0 horse chipper. If anyone can help, I'd appreciate it.

I have the original manual & would like to assist you. What portion of the instructions are you looking for. I have installed a new engine, replaced the belt & sharpened the knives so I am now almost an expert on this machine.

Hello RWStipe,

I would also appreciate a section of the Baker Professional 612P - 6 HP manual.

I believe I am missing a piece of the carburetor linkage. I believe it is from the on/off handle to the throttle. Are there any carburetor diagrams?

Thank you

100 ? Grab it.Im just checking the belt Awesome Machine

Just pikt this up for $15.00, needs attention"NOW"

IS THERE anyone with a manual , both operators and parts ---i m a retired machinist and will make anything i hav to. Thanx - Matt

Was the width and length of the belt ever determined?

Need info on the belt as well we need to replace the drive belt but don’t have the manual. Can anyone help?

Hello Jann did you end up finding what you were looking for? I have a manual if I can help let me know.