Return to the Tool Shed Forum | Post a Follow-Up

Is the 'Husqvarna 51 Chainsaw Overheat' the most recent

Posted by loger (My Page) on
Sat, Oct 8, 11 at 19:06

Is the "Husqvarna 51 Chainsaw Overheat" the most recent Husqvarna Chainsaw post vs one that was discovered to have a bad cyl through the plug's hole (maybe yesterday)? The saw had given 15 yrs of family service. There were parts and new saw cost info, along with an interest of a STIHL replacement. Was this post pulled for some reason or where is it?

Can you see enough through the plug's hole w/o a camera to make a good diagnosis vs removing the 2 cycle's muffler and inspecting through the exhaust port? loger

Follow-Up Postings:

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here