Return to the Tool Shed Forum | Post a Follow-Up

Briggs Governor linkage

Posted by frecato CT (My Page) on
Thu, Nov 4, 10 at 17:05

Hey guys I have an older little wonder push blower with a 11hp briggs 254422-0526-01 on it that I just picked up. It did not stay running so I rebuilt the carb and now realized that the throttle and governor are not attached correctly. I have the parts manual for the engine and see some pieces but not sure how they all go together. If anyone can post a picture of their governor bracket and linkage it would be greatly appreciated. Thanks.

Follow-Up Postings:

RE: Briggs Governor linkage

frecato, Can you post pics from your manual and pics of where it is missing on the briggs? I have a few old briggs manuals that might help. loger

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here