Big problem. The stock used in the repair has the numbers upside down! Is the engine mounted at an angle? (You're neighbors are fortunate to have a good guy like yourself around ! )

No Problem!

1. The #s were for my notes locating holes. Match the holes needed in your situation if you use this.

2. The Eng is a standard flat mount vs what the pic is showing.

3. I enjoy helping my neighbors. The mowerâÂÂs owner cuts most of the yards a street over and has helped me with many cords of wood. I w/n be rehabbing now if I had called him vs not wanting to bother his work schedule. Plus, he alerts me when he is cutting/trimming or others are or have.

4. The Red Oak is new stock, a fast growing tree per ours and all the other providing wood since 07.

PS. Sunday or Monday will tell the story on over working during our 80 degrees in North, TX.

80's...? Hell had the Pot-belly Lit last night in the Man Cave ! But the Labatt's Blue was Ice Cold during the Venision Tasting lol . P.S. were did you hide the lock washers on the Stove Bolts Bro (:)

Wavy lock washers, that tightens flat are there but not easy to see on that Pic. IâÂÂm working on the last of hardware I purchased by the lbs at the flea market in the 1970s. The fellow should have used a low reading set of scales. Instead he wanted to drop my purchases on his scales. I insisted that I placed the purchases on his scale and eased them down. A pound on his scale weighed at least 3 lbs on my Ice cream Scales. Those were some good variety of purchases that IâÂÂm still stocked with. Due To Slowing before I thought I would. LOL

Loger: Ok I see them now ! Yeah Pricing has increased significantly on fasteners today .