Return to the Tool Shed Forum | Post a Follow-Up

 o
What daimeter shaft is on a 1975 Horse Tory Bilt

Posted by little_acorn 5 (My Page) on
Tue, Nov 2, 10 at 20:33

I would like to know what is the diameter of the shaft on a 1975 Troy Bilt Horse 2 speed? I am about to get a NEW ENGINE for my tiller and they ask me for this information.

I am getting a 6.5 HP Honda.

If you could help me on this I would be very thankful.


Follow-Up Postings:

 o
RE: What daimeter shaft is on a 1975 Horse Tory Bilt

I think 3/4" Here is an engine that works sweet on those. Kohler PA-CH270-0011 . Anyways, it replaces the HH60 105090f

Here is a link that might be useful: engine


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here