Return to the Tool Shed Forum | Post a Follow-Up

 o
Color coding wrenches

Posted by tomplum 7-8 (My Page) on
Sat, Dec 11, 10 at 1:37

I like to color code the GearWrenches that I use all the time. Gas oil etc seems to make short life of whatever paint, coating , decal I use. I thought of the dip stuff, but would only like to mark the body of the wrench- and of course not cover the size marking. Would this work w/o peeling away? Other thoughts?


Follow-Up Postings:

 o
RE: Color coding wrenches

  • Posted by baymee LehighValleyPA (My Page) on
    Sat, Dec 11, 10 at 8:12

One thing that would work well is colored shrink tubing, if you can find a large enough diameter.

I don't know who decided that laser etching wrench sizes was a good idea, but even on my Snap-on gear wrenches, I can barely make out the sizes.


 o
RE: Color coding wrenches

I use to be able to tell most sizes by looking the size, but in my older age and after my brain tumor removal I have harder time. I like the heat shrink idea, beings I'm not going to buy new wrenches anytime soon.

Newer Craftsman tools has made their numbers sizes larger and easier to read for old tired eyes. I use red dye on the first tooth when I shapen My chains saw chains cause I freget how many I've done. I hate getting older every thing becomes more challanging, ewen tyyping!!


 o
RE: Color coding wrenches

  • Posted by baymee LehighValleyPA (My Page) on
    Sat, Dec 11, 10 at 19:30

Quote: I hate getting older every thing becomes more challanging,

I'm averaging one funeral a month, how about you RC?


 o
RE: Color coding wrenches

Back when I was 'in the business', I
riveted those 'brackets' into my wrench
drawers. All the wrenches are arranged
in order, according to size. Another
bonus is that you can tell if they are
all there, at a glance, when you close
up shop for the day.


 o
RE: Color coding wrenches

Hmmmm, heat shrink. Hot idea! Will get back to you on how it worked. Thanks for the suggestions so far.


 o
RE: Color coding wrenches

I spend some time this afternoon giving the wrenches a good cleaning and getting the remainder of the old paint off. I'm basically sorting through some stuff and making up a tool carrier. It's amazing how old some of the tools are that I use alot. Like 35 years old and going strong. I ended up buying a new set of the standard gear wrenches as ACE hardware are selling them so cheap this year. $10 for a 6 wrench set. My other set has been used for 10 years now and not ever a problem with the box end. I think the open ends on these are well enough, but could be better. All are ceratinly usable. Lose one, and it is over $10 to replace it.


 o
RE: Color coding wrenches

For us that have military experience we know about shadowing tools for easy access and inventory. Hard foam works pretty good. You lay you wrenches or sockets in the order you want, them trace around them, and cut out. Be amazed how need and orderly it looks, but when space is a problem and over abundunts of tools it may not be feasable?

I know there is alot of brain washed Ideas that are drilled into my head. Covering openings when preforming maintenance is another bad habit I have. especially for us that has dropped something where it's not suspose to be!


 o
RE: Color coding wrenches

Good Morning Mr. Plum. Apparently this
is related to your recent search for a tool pouch.
What did you finally wind up getting?


 o
RE: Color coding wrenches

"What did you finally wind up getting?"
Well, I ended up getting a Husky open topped tool carrier to try. Size wise, it will have to be tucked inna different spot. My day started off cleaning up the wood shop and my next mission is to take my "cleaned" tools and see what happens. Very skeptical.
When I did something similar before, I took a big Stanley tote and totally adapted it. Well, almost. the things I did to it reinforced and allowed it to be organized quite well. The plastic handle would lift alot- let's say a 3 beer case rating. But push down off the handle as you get up once and...
So, my thought would be to make one out of cabinet steel. Gives me an excuse to play with the wire feed and cutter I picket up last winter and do something creative for a change. We'll see....

Here is a link that might be useful: Agent orange


 o
RE: Color coding wrenches

I like the idea about the heat-shrink tubing. It comes in several different colors.

Also, have any of you ever used the dip-type tool coatings? I think it's PVC. Don't know how well it would work with tools like combo wrenches, but it's available in several colors, too.

Google for it using terms like tools, dip, and coatings.


 o
RE: Color coding wrenches

Baylee "I'm averaging one funeral a month, how about you RC?"

They have tapered off for me about everybody gone. Looking down the road and I'm NO. 3 or 4!

I've still got some of my orginal first set of Globable master wrenches I brought when I was 12 from the local small town hardware store. 47 years ago believe it or not I only broke one 9/16" open end try to break a alt. mount bolt loose. Lost some but still got most of them.

I also have my first .22 Revelation 100 single shot bolt action rifle from the same hardware store. It cost me $12.95 new. could got the soda straw 18 shot for 18.95, or the automatic for 22.50. but I figured I only needed one shot!!!!!!.


 o
RE: Color coding wrenches

I still use Craftsman hand tools that i bought back around 1948-49, right after i got out of Army. Most of the better tools are Mac, or Snap-on. Depended which tool truck came around the shop. When Metrics started, i bought a lot of deep and shallow MM sockets at the flea market, a Friend had a shop there, and he guaranteed them to be good. They are-still! I got several size of 1/2 inch drive ratchets a couple years ago for Christmas, from my son. And, the only Chinese thing i have, that lasted and works well is the hand sledge that removes flywheels and other things that a lighter hammer won't budge!


 o
RE: Color coding wrenches

I couldn't figure out getting heat shrink that would work w/ the larger wrenches. If someone does it, let me know. What I ended up doing is using the multi-color Plasti-dip kit. I mixed 5 different colors plus black. I brushed the color on the center 2-3 inches of each wrench, then also painted the size on in black and then put the clear dip over that. We'll see how it holds up.
I also figured out that tool bags aren't for wrench heads. Too narrow, too frustrating. I ended up making a tiered carry all that turned out slick enough out of something else.
It's been a while since i've seen a Globable wrench. Have some Thorsen socket tools left...

Here is a link that might be useful: Plasti-dip


 o
RE: Color coding wrenches

Been so long since I seen one I misspelled the name, GLOBEMASTER. The 19/32's may of been my first metric size wrench? cira 1963
Photobucket

Photobucket


 o
RE: Color coding wrenches

That's them! I'll have to dig though and see if I accidentally have one.


 o
RE: Color coding wrenches

I got sum labeling system from Colortraktools on line.

best Idea I have found. and they resisted brake fl lq thinner and grease 15. bucks does 100 metric and standard sockets and wrenches..way better than the shrink rapp
https://www.youtube.com/watch?v=GCO6oyGvS6I

Here is a link that might be useful: you tube

This post was edited by rusmann on Fri, Jun 28, 13 at 15:01


 o
RE: Color coding wrenches

Yah I do spend alot of time looking for the right socket now-a-days . My gear wrench handles 4 sizes


 o
RE: Color coding wrenches

NEWS FLASH! Color coding your tools for quicker recognition of tool sizes will not decrease your attractiveness to the opposite sex!

In a recent poll, a whopping 87% of women admitted to being more attracted to a man with color coded tools compared to the 13% of women who say they prefer their man's tools bare.

Color coding tools is known to decrease frustration and temper tantrums in the adult male due to his constant search for the right sized tool. In fact, those who have bravely color coded their tools have reported increased libido and lower divorce rates (not to mention increased productivity and time saved).

Don't wait until it's too late! Increase your libido, save your marriage and become irresistible to women. Color code your tools today!

Here is a link that might be useful: Be A Man !


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here