Return to the Tool Shed Forum | Post a Follow-Up

 o
Husky Chainsaw 61 starting problems

Posted by Richard1-4 none (My Page) on
Wed, Dec 12, 12 at 16:01

I have an 10 year old Husky 61 which for many years has suffered from the same problem. It seems that the pull cord locks up due to too much compression. It will pull once, then lock up and be impossible to pull more than a few inches. Waiting 30 seconds or so usually gets me one more full pull and so on. It takeas about 5 minutes to start it (with swearing part of the routine). It has just been serviced and all appears fine with no problems with the cord, carb or piston and their advice was to pull harder! I don't buy that because sometimes the cord pulls freely.
Looking at various forums it seems that there could be problems with blocked reed valve(s)? Does this seem likely - although it probably should have been checked on the service?
Once running it is fine.
Many help would be gratefully received.


Follow-Up Postings:

 o
RE: Husky Chainsaw 61 starting problems

It could be a split starter pulley or a bad rope.


 o
RE: Husky Chainsaw 61 starting problems

Pull the spark plug and see if it pulls over smoothly . Sometimes these units have an internal decompression valve which plugs up from carbon from to rich a fuel mix or just age , let us know Bro . If not the recoil could be the answer as advised.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here