Return to the Tool Shed Forum | Post a Follow-Up

fuel filter 55 husqvarna

Posted by chicosdad (My Page) on
Wed, Dec 30, 09 at 17:55

How do I get to the fuel filter on this saw? Thanks.

Follow-Up Postings:

RE: fuel filter 55 husqvarna

I have 345 may or may not be same as your 55. I use a bent scribe (straight piece of wire with a bent hook on the end will work also) remove the tank cap and fish for the fuel tube, hook it and pull it out through the tank cap, the weighted filter is on the end. pull if off the fuel line, install the new one or clean it, poke it back into the tank. walla done.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here