Return to the Tool Shed Forum | Post a Follow-Up

Stihl HS-80 trimmern primer bulb

Posted by LALA (My Page) on
Sat, Dec 25, 10 at 22:28

How do I replace a primer buld on a Stihl HS-80 trimmer.

I can not get to one of the little screws, it is behind the orange plastic part that the throtle cable is attached.

I am not sure how to remove the orange part or is there another trick I am missing?

Follow-Up Postings:

RE: Stihl HS-80 trimmern primer bulb

Take out the air filter and take a 5/16" nutdriver and
remove the two nuts and pull the carb out to access the


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tool Shed Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here