Return to the Tractors Forum
| Post a Follow-Up
JD 425 AWS Snowthrower float position issues
| | |
Posted by kohtangfred Iowa (My Page) on Tue, Feb 9, 10 at 14:25
| My 425 hydralics are acting up. When putting the snowthrower in the float position where the blower floats with the terrain. Normally you just push forward on the lever until there is a click but now it wont click and the float position dont work and the lever feels a bit sticky... its not centering itself properly as it asts sticky. any ideas? I cant tell if its in thet linkage or a valve issue.
Fred |
Follow-Up Postings:
RE: JD 425 AWS Snowthrower float position issues
| | |
| Check for rust on the linkage and also on the exposed area of the valve spools which is located just beside where you hook up your hydraulic hoses. Lubricate these areas with penetrating oil and work the levers and see if that frees up the float problem. |
|
|
|
|
