Return to the Tractors Forum | Post a Follow-Up

 o
Oil filter cross reference for Kohler engine

Posted by squaredude (My Page) on
Wed, Feb 6, 08 at 21:56

Anyone have an oil filter cross reference for the Kohler 23 hp (Courage, I think). CC LT1050 model. Thanks in advance.

Ray


Follow-Up Postings:

 o
RE: Oil filter cross reference for Kohler engine

"Briggs/Kohler type" 3/4" X 16 threads 8-11 PSI Bypass Gasket 2.734"OD X2 .430"ID 0.226" thick
Length" Wix Purolator Hastings Kohler B&S Baldwin MotorCraft AC Walmart JD
2.3" 57035 NA LF503 2805001 492932 B7165 NA NA? NA ?
2.7" 51056 L35310 LF302 1205001 492056 B1410 NA PF2210 NA AM125424
3.4" 51348 L10241 LF157 5205002 491056 BT223 FL793 PF53 ST3614 AM101207

WIX makes NAPA Gold and CarQuest Blue filters. (identical except for the paint job)
For a NAPA filter, use the last 4 digits of the Wix#
For a CarQuest filter, replace the first 2 digits of the Wix# with 85.
Example. Wix 51348 becomes CarQuest 85348 or NAPA Gold 1348.


 o
RE: Oil filter cross reference for Kohler engine

Thanks Bill - lots of choices.

Ray


 o
RE: Oil filter cross reference for Kohler engine

I just go to Advance Auto and they have a cross-reference (if you know the OEM part number). They had three different filters that would fit my tractor. I bet the other parts stores have the same.


 o
RE: Oil filter cross reference for Kohler engine

I need cross no. for Kohler oil filter 12-050-01-s


 o
RE: Oil filter cross reference for Kohler engine

That's a 2.7" filer.


 o
RE: Oil filter cross reference for Kohler engine

Single kohler filter 12-050-01 is different from the twin engines. For single you need autozone STP S3512. I have PF52/74 and PH3387 numbers written down, but have not verified they will screw on.

I know for sure the STP S3512 works I installed on my 17.5HP single kohler engine the other day when the super tech ST3614 would not work on single piston kohler.


 o
RE: Oil filter cross reference for Kohler engine

Just because they screw on doesn't mean they are suitable.
There are other things, such as micron rating, bypass pressure, gasket dimensions and anti drainback valves involved.


 o
RE: Oil filter cross reference for Kohler engine

T-H-E Filter B-0-0-k in the store Cross-references it and another post on this subject you were involved in reference the STP3512 for single kohlers, that's were I got the number from after I brought the ones that wouldn't screw on, no harm done they fit my vangaurd or my other single briggs.

Anyway, For the faint at heart need to strictly use the "exact" filter recommended by the engine manufacture or the LT manfuacture or don't ask for cheap replacements.


 o
RE: Oil filter cross reference for Kohler engine

"...and another post on this subject you were involved in reference the STP3512 for single kohlers, that's were I got the number...."
There's a lot of incorrect things said in posts that I'm involved in!
Did you see ME reference those numbers?

For the faint of heart that think they need to use a genuine Deere filter, they should look at the link-
Go to the post from May 7.

Here is a link that might be useful: Deere pics


 o
RE: Oil filter cross reference for Kohler engine

nope, but I didn't see "Just because they screw on doesn't mean they are suitable" either. the cross reference book says it will? If not? then, why is there a cross reference chart???

You said deere I didn't!!!! I think I was political correct and said LT manufacture! Hee, Hee. I seen those before and shy away from AS filters, why take a chance??, I guess cheap has more meanings than one.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tractors Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here