|
Tue, Mar 20, 12 at 13:23
| I have a Tecumesh on which I have wrung the head of the high speed jet off. I cannot find a model or serial number on it, it powers a chipper and is badged as a Craftsman, 8.5 HP. The head of the jet is stamped with the numbers 186. Can anyone tell me wich direction to go to get a replacement for this? Thanks.....and don't even ask how I managed to do it....suffice to say I'm a moron.....
Chris |
Follow-Up Postings:
|
- Posted by bill_kapaun Z8 Orygun (My Page) on Tue, Mar 20, 12 at 13:56
| Look for a 143.xxxxxx number on the engine. from that, one MIGHT be able to get the engine Model & Spec. Don't know if that will really help, but it's a possibility. |
|
| Bill... I went baqck out nad looked and all I could fine was a Sears sticker with the following info: Model: 143.988503 Don't know if that helps, but it's all I've got. Thanks Again! |
|
| 640112 is the carb number for that engine |
|
- Posted by bill_kapaun Z8 Orygun (My Page) on Tue, Mar 20, 12 at 16:05
|
- Posted by bill_kapaun Z8 Orygun (My Page) on Tue, Mar 20, 12 at 16:08
| Engine is- HM85-155851A |
|
| Wow guys!!!!! Thank you SOOO much!!! Perhaps it is not a lost cause after all!!! Thanks again! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.