|
Thu, Mar 15, 12 at 15:33
| I have a Simplicity Regent 16hp Hydro. The steering shaft broke and I easily removed it (it was in two pieces) and had it welded back together. Now, I can't get it back in; it will almost go in, but not quite. I don't want to force it and can't see where I can take anything else off to make it go in; it appears the gear on the end of the steering column is welded on or is just one piece. Any ideas? I thought about just cutting into the frame a bit to give me more wiggle room. Thoughts? |
Follow-Up Postings:
|
| You have your hands full there. I would take your exact model # and look for a parts break down to see how it is serviced. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.