|
| Looking at some of the "economy" JD--specifically the D130. We have about 1/2 acre of mostly flat yard, but it is a bit rough in patches, involving some mowing along a stream. Would like to also be able to keep our pasture in check--adding about another 1/2 to 3/4 acre of grass for occasional mowing.
Budget of $2K-- Have a good JD dealer here that I would prefer to deal with, although the Lowes JD seems to go on sale more readily, or they toss in a free cart or delivery or something. Are they really the same as the dealer offers? Opinions in general on these economy level JDs? |
Follow-Up Postings:
|
- Posted by ggoyeneche New Jersey (My Page) on Wed, Apr 27, 11 at 13:32
| It's an OK consumer mower. Better than MTD and comparable with Sears. You'll save about $100 or so buying from a big box, but ultimately a John Deere dealer will handle any warranty and service. The dealer shouldn't refuse to help you if you didn't buy from him, and Deere will smack him if they find him doing so; however, that doesn't mean you won't go to the end of the line during busy season. In my opinion, bargain as hard as possible with the dealer, and then build up a regular relationship. Keep in mind you're only buying a $2K homeowner's machine, not a $10K CUT. You'll leave a few dollars on the table, but should be more satisfying long-run. |
|
| There is one other thing to remember when working with a John Deere Dealer. Unlike MTD, Sears, and other small tractor manufactures, the JD dealer may services everything from the JD push mowers to the huge JD tractors and combines that JD makes. So don't be upset if he can not get to you when the farmers are planting or harvesting and they have several pieces of farm equipment that is broke. On the other hand they love our little tractors that they can put on the bench and work on them when things are slow like when the fields are covered by snow. |
|
| Buy a one or two year old entry level X3XX from the dealer. I picked up an '08 X300 (in '09) with 40 hors on it and paid $2300 from the dealer. |
|
| Just remember, you pay for what you get. If you opt to pay less, you will get less in quality. I went through this in 2006 when my wife & I bought our first home. granted, I have more to mow, and have some hills, but from what I understood, entry level John Deere lawn tractors are just that...entry level. You'll be getting an entry level product, with an entry level cut, and an entry level engine. It is not a tractor that will last a lifetime. I got the inside scoop because I live in Mayville, WI, which is the town right next to Horicon, WI, where the John Deere plant is. My neighbor has been working there for decades, and builds them. He basically told me that if I bought a higher series, in the X300's, that'd I'd be mowing with that tractor when I retire, which is nice because I was 26 at the time. I had a sales rep come and scope out my yard, to point me in the direction of the tractor that would suit my yard best. He recommended the X300, so I followed my "always go a step higher then designed" and got the X320. Sure, I payed more, but it was worth every penny, because I have a solid, high quality machine meant to last. With that said, I agree with Wrager, you're better off with a used, high quality tractor, then a new, low quality one. Joe |
|
| Stay away from the green ones entirely!! I see just as many Deeres run through my shop as any other brand, but the parts and dealer only service will kill you. Green paint and fancy marketing don't make a good tractor. |
|
- Posted by doberman_2007 (My Page) on Fri, Apr 29, 11 at 6:38
| Right you see a lot of them because , there is a lot of them , you get what you pay for. I always had Deere products and had great luck with them ,do they break,? yes do you have to go to a dealer for parts,?yes. I can say any other brand is the same...looked at other brands can not compare with John Deere....... and purchasing a 1 series Deere compact utility soon. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.