|
Thu, Apr 26, 12 at 9:34
| I have a John Deere LT-155 that is about 10 years old. It runs good and looks good.
However in 10 years of mowing around bushes and trees it has collected a couple of surface scratches on the plastic hood What is the best way to remove them? |
Follow-Up Postings:
|
| Try some "Polishing compound", available at places that sell to auto body shops, and at most auto parts stores. Sold under the 3M banner. follow directions on can. But, if scratches have penetrated the outer coating, you will probably not be able to remove them. This from an auto body fixer. HTH: Rusty Jones PS: The product is not the auto polish you buy to make your car shine! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.