|
| Looking for information on the Tuff Torq K71B, which is in a GT245 (2003 model year). Are there other transaxle hydro's that will fit into the GT225 GT235 or GT245? Specifically will the K71C, which has differential lock fit? Any other info?
Has anyone measured the bolt patterns on any of these transaxles? Specifically the K71 and K72? Has anyone looked at the K71 series and K72 series Tuff Torq Kanzaki transaxles to see if the mounting bolt patterns are the same? Are there any differences where frame clearances would have to be modified? Does anyone have side by side photo's with mounting bolt dimensions for these two series? Which transaxles are similar enough to each other to fit into which machine? Has anyone tried to change out the K71B, K71C or K72 with the others? Or, does anyone have some of them they are selling to compare dimensions? I e-mailed tuff torq and never got a definitive answer, seems the JD stuff is sold proprietory to John Deere. |
Follow-Up Postings:
|
- Posted by badgercreekfarms none (My Page) on Mon, Apr 25, 11 at 0:37
| Well here's what I think I found out; The GT225, GT235, GT245, LX280, LX289 and GX255 all use the same frame. The GT225 GT235 and GT245 use the Tuff Torq K71B transaxle. The GX255 uses the K71C with differential lock. So you should be able to exchange the K71B and K71C. The K71C is also used in the GX335 GX345 GX355 and the GX255. The K71A is used on some of these too, but that does not have differential lock apparently. So, you should be able to swap out a K71C to get differential lock. I can't find where the GX345 or GX series used the K72. The GX series used the K71 series. The K71A without diff lock and the K71C with diff lock. The new X300 and X500 series use the same frame AM137099. The X300 uses the K46 transaxle. This is also used in the L120, L130 155c LA130, LA135, LA140, LA150 Anyone know if the K72 series is a bolt on replacement for the K71 series? |
|
- Posted by windcatcher (My Page) on Mon, Apr 25, 11 at 14:48
| BCF: I can't answer the question about the K72 Vs K71 interchange. I can vouch for this though: My Simplicity Landlord DLX (2000 year model), and it came with a K71G. I found two K71E transmissions that had the differential lock. Both were NOS with Simplicity numbers on them. I had absolutely zero problems with doing the change over to attain the differential lock. I did have to purchase the linkage for the differential lock, and cut a hold in my fender pan for the linkage to pass through. It works like a charm. A gentleman in my area was looking for a Tuff Torq transmission to go into his John Deere. I want to say it was a JD 235 or something like it. He bought my Tufftorq 71G and e-mailed me back later saying he was happy as a lark. I do not know if he had to change some linkage or not. I kind of doubt it. That being said, please call Tuff Torq and speak to one of their tech support/engineers. They are great people to work with, and will give you the kind of answers you need. Toll Free 866-572-3441 That's as good of advice as I can give you. Cheers! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.