Briggs Stratton model 303777-0017-02 code 89082611
I just purchased a Bolens St160 that was not running. I fixed the starter, and it fired right up, on one cylinder.
I found low compression of 30# on number one, 120# on number two. also, no spark #1 (which I traced to a chewed off plug wire from a mouse at the magnetron on one side).
I found two head bolts very loose and ready to fall out. (I don't know if someone started to work on this, or it happened by itself. the head gasket looked like it was leaking. inspection of the head and valves showed the exhaust valve guide had migrated up almost 1/4 inch. the valve still opened about 1/8th inch when I pushed on the spring.
did someone install this incorrectly or did it move up? how to stop this from happening again?
also, the book calls for intake steel push rod, exhaust aluminum. my magnet test says they are both steel. any help greatly appreciated!
mownie
edhapOriginal Author
Related Professionals
Jennings Landscape Architects & Landscape Designers · Kyle Landscape Architects & Landscape Designers · Anderson Landscape Contractors · Allentown Landscape Contractors · Cupertino Landscape Contractors · Damascus Landscape Contractors · Flagstaff Landscape Contractors · Muttontown Landscape Contractors · North Canton Landscape Contractors · Placerville Landscape Contractors · San Bruno Landscape Contractors · Wayland Landscape Contractors · Carol City Window Contractors · Enumclaw Window Contractors · Framingham Window ContractorsedhapOriginal Author
mownie
edhapOriginal Author
mownie
yardtractor1
mownie
yardtractor1