Shop Products
Houzz Logo Print
zhenchu

z5000 control issue

zhenchu
10 years ago

I picked up a used Z5000 with a ruined deck. The control levers have an inch of play before the motion starts. Then there's an inch of motion to reduce speed or reverse direction. The mower is difficult to control. I've never owned a zero turn mower before. Is this backlash in the controls typical or is mine out of adjustment or worn? Is there an issue in the transaxle that causes it to be overly sensitive to the control input movement? Very small changes cause large changes in direction and it's difficult to control the beast.

Left motor speed is out of step with right motor. The left lever needs to be slightly more forward to go in a straight line. I see a rather difficult to reach adjustment for this, but not sure it should need adjustment, so perhaps the left motor is failing ?

Comments (2)