Craftsman hydrostatic
bus_driver
9 years ago
My Craftsman (AYP) 917.287261, 42" cut with two cylinder Briggs engine, fuel tank under the seat area and fuel filler on the left rear fender has a problem. 287 hours on the meter. Sudden onset, the hydro will barely pull a hill, stops when going up the hill but gradually seems to pull and then gains speed slowly. I have ordered a new belt but suspect a bigger problem.
The belt is 130969, 532130969 if used on Husqvarna.
Does this sound like a belt problem? If not, what is the more likely problem?
And with the gas tank over the transaxle, how is the belt changed? Access to the pulley on the transaxle?
Need more info, just ask.
bill_kapaun
tomplum
Related Professionals
Birmingham Landscape Architects & Landscape Designers · Arlington Landscape Contractors · Canyon Lake Landscape Contractors · Cudahy Landscape Contractors · Dinuba Landscape Contractors · Gainesville Landscape Contractors · Laguna Hills Landscape Contractors · North Richland Hills Landscape Contractors · East Norriton Landscape Contractors · Auburn Window Contractors · Castro Valley Window Contractors · Missouri City Window Contractors · Ruskin Window Contractors · Springfield Window Contractors · Sunrise Window Contractorsbus_driverOriginal Author
rcbe
bus_driverOriginal Author
slowrench
bus_driverOriginal Author