|
Mon, May 7, 12 at 18:39
| hi all, im new ta the forum.
i have a craftsman 42", Turbo Cool, 6 speed, model 917.256520 with a B & S 15.5hp OHV engine, model 28N707, type 0173 01 that i need ta adjust the valves on. any help is greatly appreciated. Thank You :) |
Follow-Up Postings:
|
| I have detailed Instructions on adjusting valves plus some helpful hints at address below, put in proper format and remind me model number and what you want. Walt Conner |
|
- Posted by mtn.driver none (My Page) on Sun, May 13, 12 at 20:56
| Mr. Walt, Would it be OK to contact you about an issue with my son's riding mower? It bent a pushrod on it & while checking it I saw the valve guide had slid up until there is less than 3/16" between it & the spring retainer. While looking on the net for more info there were some past post that you had made on this forum & they sounded very infomative. Your help would be greatly appreciated by me since I 'm the one who's going to have to repair it. Thanks Jimmy |
|
| Sure, my address is posted above. Remind me, model number, problem, etc. Walt Conner |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.