mtd pulley tension spring
rick0127
10 years ago
Related Stories
GARDENING AND LANDSCAPINGSeek Shelter in the Shade This Summer
Open up to outdoor living with 8 garden shade strategies
Full StoryI have posted this on other forum with no luck. I have a yard machine 42 inch. I replaced the belt, PTO cable & spring and a pulley tension spring. When I first tried it the belt was too tight, pulled the pulley to far and was rubbing. I took off the pulley tension spring thinking I had it installed incorrectly. Couldn't find a different way to connect it so I put it back on. Now the belt is loose and will not turn when the PTO is engaged. Where is the spring supposed to be connected (both ends). Any ideas why this may have happened would be most helpful.
thanks
rcbe
rick0127Original Author
Related Professionals
Ferndale Landscape Architects & Landscape Designers · Saint Matthews Landscape Architects & Landscape Designers · Tomball Landscape Architects & Landscape Designers · Allentown Landscape Contractors · Buford Landscape Contractors · Concord Landscape Contractors · Fountain Valley Landscape Contractors · La Mirada Landscape Contractors · San Rafael Landscape Contractors · Teaneck Landscape Contractors · Westford Landscape Contractors · Fort Myers Window Contractors · Greenwich Window Contractors · Naples Window Contractors · Redwood City Window Contractorsrcbe
rick0127Original Author
rcbe
tomplum
rick0127Original Author
rcbe
rick0127Original Author
rcbe
tomplum
rick0127Original Author
rick0127Original Author
Sandy Malone
tomplum
HU-76557666
David Davis