|
Fri, Jun 15, 12 at 21:57
| Hello all,
I have a Snapper 42 inch, 16 HP, series 22, rear engine rider and need to replace both axle boots. How much grease is needed inside the boots when they are replaced? Thanks! |
Follow-Up Postings:
|
| I have no experience with the 42" model but I am sure they are the same as other models. You don't put grease inside the boots, it works its' way there from the properly filled gear boxes. Walt Conner |
|
- Posted by paclockman (My Page) on Sat, Jun 16, 12 at 9:12
| That makes sense! Thanks Walt! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.