Return to the Tractors Forum | Post a Follow-Up

Husqvarna YTH24V48 Attachment Clutch Control

Posted by David_Q none (My Page) on
Fri, Jul 4, 14 at 3:36

Used my brand new Husqvarna for the first time today on the lawn. The grass was quite long and a bit damp. All worked well to start with cutter blades set at highest point but then I noticed that when I disengaged the attachment clutch control the blades continued to turn - so I was able to get off the tractor with the blades still engaged. Everything else about the clutch control switch seemed to work normally. If I left the control engaged the engine cut off when I got off the tractor. The problem is I haven't been able to turn off the blades. If I cut the engine, when I restart with clutch control off the blades are automatically engaged. Would appreciate any thoughts for how this can be simply fixed.

Follow-Up Postings:

RE: Husqvarna YTH24V48 Attachment Clutch Control

if you have read and have followed the operator's manual's instructions for the tractor's setup and operation and your described problem still exists, time to get your dealer involved for warranty repair. The mower deck blades should stop when you disengage the clutch control.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tractors Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here