Return to the Tractors Forum | Post a Follow-Up

 o
Need engine ID for a Generac pressure washer

Posted by mownie 7 (My Page) on
Thu, Jul 31, 14 at 10:46

Guys, I posted a thread over at the tool shed forum about my dilemma about needing to get the specific Briggs engine model and type numbers for this washer.
Rather than post a new/duplicate thread on the tractor forum, I am including a link to that thread.
If you have any suggestions, please offer them in the tool shed tread.
Thanks :^)

Here is a link that might be useful: tool shed thread

This post was edited by mownie on Sun, Aug 10, 14 at 21:18


Follow-Up Postings:

 o
RE: Need engine ID for a Generac pressure washer

see if the links below are for your washer. My impression is the cost of replacement parts is more than a new machine.


http://www.ppe-pressure-washer-parts.com/files/1961581/uploaded/1292_0en3w.pdf

http://www.ppe-pressure-washer-parts.com/generac-pressure-washer-model-1292?gclid=Cj0KEQjwjZefBRDfsY28oNjbgeABEiQA8kVt3axhCAiOgl21g6ddWKlkWB4zKCEn97ATH4v_ZD-YtLIaAk3h8P8HAQ

briggs 121412-0148-E1 is original engine

briggs 122012-0523-B8 is replacement engine

short block pn 699582


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tractors Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here