Return to the Tractors Forum | Post a Follow-Up

 o
john deere 38 mower deck

Posted by golfhounds ma (My Page) on
Mon, Jul 19, 10 at 11:06

How do you remove the mower deck from a John Deere 165 Hydro. It is a 38" deck. I dont have an owners manual. Diagrams, Please. Thanks, Jim


Follow-Up Postings:

 o
RE: john deere 38 mower deck

Let me start by saying I do not have the 165 but have the JD LT 155 with the 38" deck. I had the tractor for years before I worked up the courage to remove the deck, thinking that I was going to have to re level it and while simple re leveling anything never turns out simple.

On the LT155 there are three points where the deck is attached to the tractor, and one control rod connection.

First disconnect the control rod, It is held to the deck by a simple cotter pin. It can be accessed from the back of the deck.

I place some three-wheeled furniture dollies under the deck and lowered it on to them. There are two pins with cotter pins at the rear of the deck that go through a fitting on the tractor. Remove the pins from both the fittings on both side of the deck.

Now with both pins out and the control rod disconnected move the deck forward until the rod at the front of the deck is free of the "U" fitting on the deck. you may have to lift the deck slightly or use a little force to align the rod connecting the deck to the tractor so it will slip out of the fittings.

Since you are not messing with any of the adjuster nuts, the deck will go back the same way you took it off and no leveling adjustments need be made.

It almost takes longer to write this than it takes to remove the deck.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tractors Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here