Shop Products
Houzz Logo Print
eclipserocksyou

2011 Craftsman LT 2000

Eclipserocksyou
9 years ago

When I went to start my rider it wouldnt crank. There is no power coming out of relay next to battery. No power going to small wires. Ignition switch seems to energize. Jumped starter and spins but not engage. No power to seat switch. I think solenoid and switch must be ok because they arent even getting ignition voltage to them. The two red wired are hot coming out of switch when turned on. Any ideas?

Comment (1)

Sponsored