Return to the Tractors Forum | Post a Follow-Up

 o
Craftsman Mower mowing to low

Posted by shelia--greenthumb 6 (My Page) on
Thu, Jul 3, 14 at 14:14

My mower won't adjust to a higher mowing setting?
Any advice how to fix the the problem?


Follow-Up Postings:

 o
RE: Craftsman Mower mowing to low

Wow, Shelia, your post raises lots of questions -

What is the model number of your mower? Are you saying that you have adjusted it to the highest setting, and that it's still mowing the grass too short? Or are you saying that something is preventing you from putting it on the highest setting? If yours is a riding mower or lawn tractor, are the tires properly inflated? Have you somehow damaged the deck by running into something? Have you done any work (like installing new blades) that might have caused the problem? We really need a better picture of the problem in order to suggest solutions.


 o
RE: Craftsman Mower mowing to low

Maybe the ground is just very high there...


 o
RE: Craftsman Mower mowing to low

It is a riding lawn mower. It is an old mower that I found
in my dad's garage. I put in a new battery and I'm using it to mow the yard. I inflated the tires to the correct amount of air. Thanks for trying to solve my problem.


 o
RE: Craftsman Mower mowing to low

Look all over the mower for a handle that raises or lowers the mowing deck. It should be readily visible.
I f you would tell us the name/make of the rider, Horse power, and other pertinent facts, we should be able to help you! The serial number plate, or sticker should be under the seat. Post everything on that sticker! it will help us to help you. by: Rusty Jones, who has had a lot of Sears/ Craftsman lawn riders to fix. RJ


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tractors Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here