|
Fri, Jul 16, 10 at 14:28
| I'm new here. I have a Simplicity 17gthl mower with a kohler horizontal engine that quits after running for a few seconds. It's definitely electrical. I replaced the circuit breaker which was corroded. I also replaced the relay which looked good. Same problem. Now I jumper from 12volt to the engine plug that goes to the points and it'll run all day, but won't charge with the key on. It does charge for the few seconds that it runs without the jumper. Is there another relay somewhere like in the switch or maybe just a bad switch?.......Thanks.........Dave in Wi. |
Follow-Up Postings:
|
| Please find the model number and spec number of the engine and post them. You will find the numbers on the engine. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.