|
Tue, Jul 13, 10 at 19:50
| I have a 1981 Wheel Horse B165, ID #02-16BP02-10281. I need to replace the spring that pulls the break pedal back to position after released. I also need to replace the break shoes and adjust the break after making the repairs. Can anyone tell me where to attach the spring on the chasis? Also, how do I determine when the compression spring on the break pedal rod is properly adjusted? I had to drop the transmission to work on it and the break spring disappeared and I did not see how it was connected.
The sping is number 45 on the parts diagram. The break mechanism is part of the transmission and I cannot find any detail for it. Any help is appreciated. |
Follow-Up Postings:
|
| if no satisfactory answers here, might chk over with the wheelhorse bunch the link below |
Here is a link that might be useful: red square
|
| Thanks, I posted there also. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.