Return to the Tractors Forum | Post a Follow-Up

17 hp vanguard

Posted by gene1969 none (My Page) on
Fri, Aug 2, 13 at 11:22

Oops! valve sticking in top of piston seems to be reason for lack of compression. If I set engine upside down to seperate crankcase, do I need to be aware of internal parts dropping at my feet? engine is 17hp B/S vanguard verticle crank. #312707-0136-E1

Follow-Up Postings:

RE: 17 hp vanguard

I can send you a Service Manual for your engine IF you like, address below, put in proper format and remind me engine model number and what you want.

Walt Conner
wconner at frontier dot com

RE: 17 hp vanguard

certainly appreciate offer, but decision has been made not to pursue repair. fathers are like that some times!

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Tractors Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here