|
Sat, Aug 21, 10 at 14:18
| Hello I have a 2 year old Snapper 2250.. The mower has about 50 hours on it. Today I was cutting the grass, did fine , but when I started it up wont move checked the drive belt seemed ok... I cut my neighbors yard today, a little taller than mine , but not badd..... I am just really perplexed... Any advice would be awesome... Could the hydrostat have burnt up? |
Follow-Up Postings:
|
| My guess is the bypass lever to allow the unit to roll got moved? Brake locked? Wheel key missing? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.