|
Thu, Aug 5, 10 at 15:30
| Hi Guys, the drive belt keeps coming off.have checked tensioner, changed bearing, changed belt. Any ideas?
Thanks, Joe |
Follow-Up Postings:
|
| Is it the proper belt or is it a 'will fit'? Are the pulleys bent or misaligned? Are the idler linkages sloppy or bent? Is the belt properly routed? |
|
- Posted by bushleague MA (My Page) on Thu, Aug 5, 10 at 20:37
| The input shaft bearings on the transaxle are worn out which is why you're throwing the belt. Grab the pulley on the transaxle and check for play. There are kits available to repair these, the transaxle will need to be removed however. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.