Return to the Tractors Forum | Post a Follow-Up

 o
Electrical Problems and Fuse Boxes

Posted by EdGallop 7 (My Page) on
Wed, Aug 6, 14 at 17:15

I have a John Deere Z225 mower that would turn over but not start. Power was not going to the carburetor solenoid so the gas was blocked. There was also no power going to the PTO switch or to the hour meter. After a lot of puzzling time tracing wires I realized the problem was in the fuse box. There were no blown fuses but there was a yellow wire connected to the back of an empty slot that had no 12v power. I jumped it to the red fused box next to it and everything worked fine. I learned that a fuse box doesn't just hold fuses. If any wires are connected to an empty shot then there is a built in wire that you can't see. I hope this post saves someone the anguish I went through. Start with the fuse box, not just the fuse.


Follow-Up Postings:

 o
RE: Electrical Problems and Fuse Boxes

The resolution of all electrical problems starts with the correct schematic and the knowledge to understand it.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tractors Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here