Shop Products
Houzz Logo Print
richard295_gw

oil leak on 46' craftsman 25hp twin intek

richard295
12 years ago

I have an oil leak from what looks like the sump area.

This forum lookup shows a gasket which is sandwiched between the metal sump. There are 10 bolts that fasten this pan/gasket.

Question is are these bolts accessible from under the tractor or do you have to pull the engine to get at them?

I was thinking of trying to tighten them, at least the first three toward the front of the tractor. If the engine must be pulled then it makes sense to replace the gasket.

Anyone know how many bolts required to remove the engine. Is it a real hard job? Any help would be appreciated.

Comments (3)