|
Tue, Sep 21, 10 at 19:41
| I have a Troy Bilt Super Bronco model 60TG. The steering has become totally disengaged all at once. The steering wheel turns but the wheels will not. The steering gear and the pinion gear just barely make contact. Neither appears damaged...they are just too far apart to engage properly. What could cause this sudden problem? |
Follow-Up Postings:
|
| Sometimes the lower bushing on the steering shaft goes away on these. Best to replace both. Just need to get into it and look for wear. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.