Return to the Tractors Forum
| Post a Follow-Up
Question on purchase of a Bagger for 42'
| | |
Posted by markymark-ca Central Cal (My Page) on Fri, Sep 4, 09 at 21:07
| I'm getting no where trying to find a bagger that will any ANY of my units.
I have 3 42" decks. 1 46" Murray unit. I've bought 3 separate shoots to fit the deck so I can get a bagger going and none fit.
Tomorrow I am going to Lowes AGAIN...to look at the bagger that is mounted on a cheapo 38 inch Bolin. I am taking the deck shoots which I already have to try and NOT buy that style.
So what sort of guidance can you folks give me on finding a
bagger for one of my units.
I have a Yard Machine 42, a Craftsman with an oddball deck and a Scotts which claims on the side to be built by John Deere.
And a triple blade Murray 46,,, |
Follow-Up Postings:
RE: Question on purchase of a Bagger for 42'
| | |
| It would be a lot easier to buy the proper boot for the deck. Lowes is NOT a mower shop. Any mower bone yards by you? That would be the most cost effective.... |
RE: Question on purchase of a Bagger for 42'
| | |
| EBAY....and you're right about the Scotts, it's built by JD. Just look up the PN on the internet using your model number, then search ebay using the PN. Easy peasy. |
RE: Question on purchase of a Bagger for 42'
| | |
| Bought a new bagger system. $299. Going to try it out this morning. Found one to fit the Yard Machine. I really wanted one for the Scotts but they were 399- plus the token 9% to Taxifornia
 |
RE: Question on purchase of a Bagger for 42'
| | |
| I have an old bagger system off of a JD S-92 38" that I'll give you if it would fit and if you pay the shipping from TN. It has two cloth bags that are worn out, but something could be fabricated. The frame that holds the bags and the plastic shoot from the deck to the bags are OK. If interested, send me some specs and I'll measure what I have. |
RE: Question on purchase of a Bagger for 42'
| | |
| One aspect that I quickly found out....those netting bags allow dust and fine grass to blow back on you while you mow. I had a used triple bagger with buckets. Next week we try it with the buckets vs the netting bags. RE: Bertd: I have MTD decks and one Scotts 42" that says it was built by JD |
RE: Question on purchase of a Bagger for 42'
| | |
I need a twin bagger for a Craftsman 42 inch cut riding mower 2004 model, the model number for the twin bagger is
71-24891 Thanks georgeandkathy08@comcast.net |
|
|
|
|
