Return to the Tractors Forum | Post a Follow-Up

 o
Great Dane model GDRZ25KHE

Posted by doogle45 none (My Page) on
Wed, Oct 23, 13 at 21:02

had a small fire melted wiring harness and sam unit. repaired wiring harness replaced sam unit both coil packs ignition switch diode in harness and still no spark at spark plugs what am i missing about to stick a match to it please help with any suggestions other than c4


Follow-Up Postings:

 o
RE: Great Dane model GDRZ25KHE

it has kohler CV25S spec# 69528


 o
RE: Great Dane model GDRZ25KHE

What part numbers did you use and were there any harness differences? Was the fire electrical in nature to begin with?


 o
RE: Great Dane model GDRZ25KHE

not a electrical fire gas line broke .no new harnesses repaired the orignal with new wire of same type and size and colors had harness contectors off of another mower


 o
RE: Great Dane model GDRZ25KHE

You should check part numbers plus compare if you were following the old harness from the other unit if that harness was identical. Kohler has different ignition systems on CV twins and don't the parts don't play the same game. I'm not exactly clear which harness you are working with. Was the diode perhaps in the harness that you repaired backwards?


 o
RE: Great Dane model GDRZ25KHE

repaired harness as per wiring diagram for that great dane model diode is in the correct position according to wiring diagram.thanks for your help does the blue wire and the red wire going to the sams unit both get 12v to them.there is a blue red white that goes to the sams unit.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Tractors Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here