|
Mon, Nov 8, 10 at 12:07
| I have a John Deere L110 riding mower
With engine running when I apply the deck engagement lever the engine shuts down. With the same lever on I can move the belt, turning the blades by hand easily. (nothing seized) I think something is electrically killing the engine. Anybody have a thought or a schematic Thanks
|
Follow-Up Postings:
|
| Possibly a defective, or loose, seat switch. The deck engagement safety interlock switch on this Deere makes the final decision of whether it is safe to permit the blades to become powered. With a defective, or loose seat switch, the logic is that the seat is unoccupied and therefore the engine must be shut off. |
|
| Thanks mownie You were right on - the switch was falling off |
|
| Glad I was of some help and thank you for the feedback. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.