|
Wed, Nov 3, 10 at 22:21
| Model: 286707
Type: 0420 01 Code: 92011731 I just did a engine swap on an old Snapper. I was looking at the carb and it is not like the old flow jet. So I was wondering how to adjust carb, and general repair. Jim
|
Here is a link that might be useful: Item purchase link is
Follow-Up Postings:
|
| You should be able to download a free Service Manual for your engine at - http://www.mymowerparts.com/pdf/Brig...Spec Charts/ or if that doesn't work, go to the B&S Home Site, you will need the model and type numbers. Walt Conner |
|
- Posted by jeep461 Z9 Texas coast (jpotts461@gmail.com) on Thu, Nov 4, 10 at 21:10
| Thanks Walt all the information I could ever use. I will have to try their parts also. I do not have a real good source of snapper and mower parts. Jim |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Tractors Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.